Configuring Ddns Settings - HIKVISION DS-6700HUHI-K Series User Manual

5.3.3 Configuring DDNS Settings

If your device is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be
used for network access.
Prior registration with your DDNS Provider is required before configuring the system to use DDNS.
Steps:
1.
Go to Configuration > Network > Basic Settings > DDNS to enter the DDNS Settings page.
2. Check Enable DDNS to enable this feature.
3. Select DDNS Type. Three different DDNS types are selectable: DynDNS, PeanutHull, and NO-IP.
•
DynDNS:
(1) Enter Server Address for DynDNS (e.g., members.dyndns.org).
(2) Enter the Domain obtained from the DynDNS website.
(3) Enter the User Name and Password registered in the DynDNS website.
(4) Confirm the password.
(5) Click Save to save the settings.
•
PeanutHull:
(1) Enter the User Name and Password obtained from the PeanutHull website.
(2) Confirm the password.
(3) Click Save to save the settings.
DS-6700HUHI-K Series Encoder User Manual
Figure 5. 12 DynDNS Settings
Figure 5. 13 PeanutHull Settings
36