Configuring Line Crossing Detection - HIKVISION DS-6700HUHI-K Series User Manual

The Sensitivity of the detection is supported by certain camera models. Refer to actual display for details.
10. Drag the slider to set the percentage.
Percentage: Range [1-100]. Percentage defines the ratio of the in-region part of the object which can trigger
the alarm. For example, if the percentage is set as 50%, when the object enters the region and occupies half
of the whole region, the alarm is triggered.
11. Repeat the above steps to configure other regions. Up to 4 regions can be set. You can click the Clear button
to clear all pre-defined regions.
12. Click Arming Schedule to set the arming schedule. Refer to Step 6 in Chapter 7.1.1 Configuring Motion
Detection.
13. Click Linkage Method to select the linkage methods for intrusion detection. Refer to Step 7 in Chapter 7.1.1
Configuring Motion Detection.
14. Click Save to save the settings.

7.2.3 Configuring Line Crossing Detection

Purpose:
Line crossing detection function detects people, vehicle or other objects which cross a pre-defined virtual line, and
some certain actions can be taken when the alarm is triggered.
Line crossing detection function varies according to different camera models.
Steps:
1. Go to Configuration > Event > Smart Event > Line Crossing Detection.
DS-6700HUHI-K Series Encoder User Manual
61