Chapter 6 Camera Settings
6.1 Configuring Image
6.1.1 Configuring Display Settings
Purpose:
You can configure the scene, brightness, contrast, saturation, etc. in the display settings.
Steps:
1.
Go to Configuration > Image > Display Settings to enter the Display Settings page.
2.
Select the camera from the drop-down list.
3.
Select the Scene according to different light conditions. Four scenes are selectable:
Standard: in general lighting conditions (default).
Indoor: the image is relatively smoother.
Outdoor: the image is relatively clearer and sharper. The degree of contrast and saturation is high.
Dim Light: the image is smoother than the other three modes.
4.
Set the image parameters of the camera.
Brightness describes bright of the image, which ranges from 0 to 255.
Contrast describes the contrast of the image, which ranges from 0 to 255.
Saturation describes the colorfulness of the image color, which ranges from 0 to 255.
Hue describes the degree to which a stimulus can be described as similar to or different from stimuli that are
described as red, green, blue, and yellow, which ranges from 0 to 255.
Sharpness describes the edge contrast of the image, which ranges from 0 to 15.
Denoising describes the process of removing noise from a signal, which ranges from 0 to 5.
5.
(Optional) Click Default to restore the image parameters to the default settings.
DS-6700HUHI-K Series Encoder User Manual
Figure 6. 1 Display Settings
44