Configuring Rs-485 Serial Port - HIKVISION DS-6700HUHI-K Series User Manual

1. Go to Configuration> System > System Settings > RS-232.
2. Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage.
If you want to connect the camera by the RS-232 port, the parameters of the RS-232 should be exactly the same
with the parameters you configured here.
3. Click Save to save the settings.

5.2.4 Configuring RS-485 Serial Port

Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ parameters should be
done before you control the PTZ unit.
Steps:
1. Go to Configuration > System > System Settings > RS-485.
DS-6700HUHI-K Series Encoder User Manual
Figure 5. 7 RS-232 Settings
33