Table of Contents
Advertisement
User Manual of DS-6600 Audio/Video Encoder
6.
You can copy your settings to other alarm inputs.
7.
Click Save to save the settings.
8.3.3 Configuring Video Loss Alarm
Steps:
1.
Click Remote Configuration> Camera Settings> Video Loss to enter the video loss alarm setting
interface.
2.
Select the camera to configure the video loss alarm.
3.
Check the checkbox of Enable Video Loss.
4.
Click Edit to edit the arming schedule for video loss detection. The arming schedule configuration is the
same as the Setting of the Arming Schedule for Motion Detection. Please refer to Step 2 Set the Arming Schedule
for Motion Detection in Section 8.3.1 Configuring Motion Detection.
5.
Click the Linking Method tab to set the actions taken for the video loss alarm. Please refer to Step 3 Set the
Alarm Actions Taken for Motion Detection in Section 8.3.1 Configuring Motion Detection.
8.3.4 Configuring Tamper-proof Alarm
Purpose:
If you enable this function, an alarm will be triggered when the image of camera is tampered with.
Steps:
1.
Click Remote Configuration> Camera Settings> Tamper-proof to enter the Tamper-proof Settings
interface.
2.
Select the camera to configiure the tamper-proof detection alarm.
Figure 8.20 Video Loss Alarm Settings
63
Advertisement
Table of Contents
