HP 8753E Programming And Command Reference Manual page 149

Sets the loss value for a particular
frequency, set by POWLFREQ[D], in the
power loss list. Range: -9900 to 9900 dB
Designates whether the HP 436A (ON) or
the HP 437B/438A (OFF) is to be used as
the power meter.
Selects power ranges when in manual
power range. Range: 00 to 07.
Selects power sweep, from the sweep
type menu.
Trip power (set maximum attenuation)
ON or OFF.
Selects power ranges when in manual
power range. Range: 00 to 07.
Displays the previous page of the
operating parameters list.
Presets the analyzer to the factory
preset state. OPC-compatible.
Selects color print (as opposed to
monochrome; see also PRIS).
Copies the display, in raster graphics
mode, to a printer.
Begins printing the sequence selected.
Range: 1 to 6.
Prints all list values or operating and
marker parameters in ASCII text mode.
Selects standard (monochrome) print.
Selects the printer handshake mode as
either Xon-Xoff or DTRDSR.
Sets the printer port to HP-IB.
Sets the printer port to parallel.
Sets the printer port to serial.
Turns ON and OFF the printer auto feed.
Sets the printer baud rate. Values: 2200,
2400, 4800, 9600, 19200.