HP 8753E Programming And Command Reference Manual page 120

Sets the plotter to the following default
setup conditions:
Plot Data On
Plot Mem On
Plot Grat On
Plot Text On
Plot Mkr On
Auto-feed On
Scale Plot Full
Plot Speed Fast
Sets the number of files in the directory at
disk initialization. LIF only.
8192.
Specifies which disk in an external
multiple-disk drive to be used for
save/recall.
Specifies which volume of an external
multiple-volume disk drive to be used for
save/recall.
When ON, displays the response and
stimulus values for all markers that are
turned ON; when OFF, only the active
marker's value is displayed.
HP-IB Progr amming and Command Reference Guide
Pen Number:
Data
Memory
G r a t i c u l e 1
Marker
Line Type:
Data
Memory
Range: 0 to 30.
Range: 0 to 30.
2
5
7
7
7
7