HP 8753E Programming And Command Reference Manual page 113

These commands begin a calibration sequence:
These commands select a default calibration kit:
Note
Short, load, open, thru (SLOT) 2-port.
One-path 2-port.
Response and isolation.
Response.
Thru, reflect, line or Line, reflect, match
2.92' (HP 85056K cal kit).
series).
Type-N 50 ohm (HP 85032BE cal kit).
Type-N 75 ohm (HP 85036BE cal kit).
TRL 3.5-mm (HP 85052C cal kit).
User-defined calibration kit.
Calibration: none. Turns calibration type
to OFF.
Provides access to the power meter
calibration functions.