Hp-Ib Only Commands - HP 8753E Programming And Command Reference Manual

Action
Mnemonic
oefflcient 02,. . . 12>
SAVC
al.
HP-IB Programrm 'ng and Command Reference Guide
S ? Description
INPUT
Inputs an individual error coefficient array.
2
Issue the command CALIxxxX;(XXXX specifies
the data calibration type), then input each of
the appropriate individual error coefficients
using INPUCALC. Finally, issue SAVC; and
trigger a sweep.
This OPC compatible command denotes
1
completion of the error coefficients transfer to
the instrument.
3 D Input a cal kit.
3 D Inputs error-corrected data.
3 D Inputs formatted data.
3 D Inputs the learn string. Preceded by SELL if
learn string is not current revision.
Inputs power meter cal array. Values should be
entered as 100 times the power meter reading
in dB.
3 D Inputs raw data.
3 D
3 D
3 D