HP 8753E Programming And Command Reference Manual page 106

Action Mnemonic
imit
darker
'lot
HP-IB Progr amming and Command Reference Guide
S ? Description
C
Outputs the limit test results for each stimulus
1
point. The results consist of four numbers. The
first is the stimulus value tested, the second is
the test result:-1 for no test, 0 for fail, 1 for
pass. The third number is the upper limit value
and the fourth is the lower limit value. This is
an ASCII transfer (FORM 4).
1 Outputs the limit test results as described for
OUTPLIML for the active marker
1 Outputs the active marker values in 3 numbers
The first two numbers are the marker values,
and the last is the stimulus value. See 'lkble l-1
for the marker values.
1 Outputs the memory trace from the active
channel. It is error corrected data in
real/imaginary pairs, and can be treated the
same as data from OUTPDATA.
1
Outputs marker statistics:
1
deviation, and peak to peak deviation. ASCII
format (FORM 4).
Outputs results of bandwidth search:bandwidth
1
center, and Q. ASCII format (FORM 4).
Same operation as OUTPMWID plus the loss
1
value.
1 Outputs an ASCII string of the options installed
Outputs the HP-GL plot string in ASCII format
1
to the HP-IB port.
plotter or printer.
Outputs power meter cal array for channel 1 oi
2
channel 2. Values are sent as 100 times the
power meter reading in dB.
mean, standard
Can be directed to an HP-G1