Preset Conditions - HP 8753E Programming And Command Reference Manual

When the c-1 key is pressed, the analyzer reverts to a known state
called the factory preset state. This state is deEned in 'lhble l-l.
PRESET PRESET VALUE
CONDITIONS
Analyzer Mode
Analyzer Mode Network Analyzer
Mode
Frequency Offset
off
Operation
Offset Value 3
Harmonic Operation
Stimulus
Conditions
Sweep Type Linear Frequency
Step Sweep
Display Mode
Trigger Type
External Trigger
Sweep Time
Start Frequency 30 kHz
Frequency Span 2999.97 MHz
Frequency Span 6999.97 MHz
(Opt. 006)
Start Time
0
Time Span 100 ms
CW Frequency
Source Power
Power Slope 0 dB/GHz; Off
Start Power
Power Span 25 dB
Coupled Power On
Source Power
Coupled Channels
Coupled Port Power
HP-IB Frograxnmin
PRESET PRESET VALUE
Power Range Auto; Range 0
No. of Points 201
Frequency List
Frequency List
Edit Mode
Points
List Frequency
Sweep Mode Swept
List Power
List lFBw
Response
Conditions
Parameter
Channel 3: 512;
Channel 4: 522
Conversion Off
Format Log Magnitude
(all inputs)
Display Data
Color Selections Same as before
Dual Channel Off
Auxiliary Channel Off
Split Display
Active Channel Channel 1
Frequency Blank Disabled
g and Command Reference Guide