HP 8753E Programming And Command Reference Manual page 102

Action Mnemonic
al
rigger
IDN?
KOR?
MARKBUCK[D]
NOOP
DPC
ompletion
lot/print
HP-IB Programming and Command Reference Guide
S ?
Description
Ii
1 Provides access to functions within the l-port
cal menu. (HP 8610 compatibility.)
1
Sets up a default state for copy.
1 Sets the trigger polarity high.
1 Sets the trigger polarity low.
1
Outputs the identification string: "HEWLE'lT
PACKARD, 87NNE,O,XXX", where 87NNE is
the model number of the instrument and XXX
is the firmware revision of the instrument.
Imitates pressing a key. The data transmitted is
the key code, as defined in Figure 1-6. Range
for D- 1 to 61.
reply is positive, it is a key code. If it is
negative, then set bit 16 equal to bit 14, and ths
resulting two byte integer is the RPG knob
Moves the marker to the selected point on the
trace. On a 201 point sweep, D can range from