HP 8753E Programming And Command Reference Manual page 107

Mnemonic
Action
OUTPPRIN
O U T P P R N A L L 1
OUTPRAW 1
OUTPRAF< I> 1
OUTPRFFR
OUTPSEGAF'
O U T P S E G A M ' 1
Programming h!m?npks Guide
Special Functions."
S ? Description
OUTPUT (continued)
1 Array 1 (Sll data). Analogous to OUTPRAW
except that pre-raw data has not had sampler
correction nor attenuator offsets applied. Use ir
conjunction with 'lake4 mode only.
Array 2 (S21 data).
1
1 Array 3 (512 data).
Array 4 (522 data).
1 Outputs the print string of the display graphics.
Outputs all pages List Values or current page of
Operating and marker parameters in ASCII.
Activate the desired function with LISV to prinl
values or OPEP to print operating parameten
prior to this command.
Array 1 (Sll data).Outputs uncorrected data
arrays for the active channel. Raw 1 holds the
single parameter data unless a 2-port calibratior
is on, in which case raw 1 holds Sll and the
following arrays hold S21, 512, and S22,
respectively. The data is in real/imaginary pain
1 Array 2 (521 data).
1 Array 3 (S12 data).
Array 4 (S22 data).
1
1 Outputs external source RF frequency when in
external source instrument mode.
Outputs the segment number and its limit test
1
status § for all active segments.
Outputs limit test minImax all segs. Outputs the
segment number, max stimulus, max value, min
stimulus, min value for all active segments.
HP E45'K