Maintenance - Optimum B50 GSM Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
6

Maintenance

In this chapter you will find important information about
 Inspection,
 Maintenance,
 Repairs.
The diagram below shows which of these headings each task falls under.
Inspection
Measuring
Testing
Fig.6-1: Maintenance - Definition according to DIN 31051
ATTENTION!
Properly-performed regular maintenance is an essential prerequisite for
• safe operation,
• fault-free operation,
• long service life of the machine and
• the quality of the products you manufacture.
Installations and equipment of other manufacturers must also be in optimum condition.
ENVIRONMENTAL PROTECTION
During work on the drilling head, make sure that
• collector vessels are used, with sufficient capacity for the amount of liquid to be coll-
ected.
• Liquid and oils are not spilt on the ground.
Clean up any liquid or oils immediately using proper oil-absorption methods and dispose of them
in accordance with current legal requirements on the environment.
Cleaning up spills
Do not re-introduce liquids spilt outside the system during repair or as a result of leakage from
the reserve tank: collect them in a collecting vessel to be disposed of.
Disposal
Never dump oil or other pollutant substances in water inlets, rivers or channels.
Page 38 Geared drill
MAINTENANCE
Maintenance
Rough cleaning
Fine cleaning
Conserving
Lubricating
Completing
Replacing
Readjusting
B50 GSM
Maintenance
Repairs
Mending
Replacing
Adjusting
Version 1.0.3 22 / 07 / 2014