Handling; Safety; Control And Indicating Elements - Optimum B50 GSM Operating Manual

Handling

4 Handling
4.1

Safety

Use the geared drill only under the following conditions:
• The geared drill is in proper working order.
• The geared drill is used as prescribed.
• Follow the instruction manual.
• All safety devices are installed and activated.
All problems should be eliminated immediately. Stop the machine immediately in the event of
any abnormality in operation and make sure that it cannot be started up accidentally or without
authorisation.
Notify the person responsible immediately of any modification.

„Safety during operation" on page 14
4.2

Control and indicating elements

22 / 07 / 2014
Drill chuck guard
Cooling pump
Fig.4-1: Geared drill B50 GSM
Version 1.0.3
OPTIMUM
M A S C H I N E N - G E R M A N Y
Gear selector for speed increments
Control panel
Spindle lever and switch spindle
feed
Drilling table
Clamping lever for table rotation
B50 GSM Geared drill Page 25