Safety During Maintenance; 1.15.1 Disconnecting And Securing The Drilling Machine; Using Lifting Equipment; 1.16.1 Mechanical Maintenance - Optimum Opti drill B 24H Operating Manual

no objects are damaged.

Avoid any unsafe work methods:
Make sure that your operation does not create a safety hazard.

The rules specified in these operating instructions must be observed during assembly,

operation, maintenance and repair.
Do not work on the drilling machine if your concentration is reduced, for example, because

you are taking medication.
Observe the accident prevention regulations issued by your Employers Liability Insurance

Association or other supervisory authorities applicable to your company.
Inform the supervisor about all hazards or faults.

Stay on the drilling machine until the machine completely stopped moving.

Use the specified personal protective equipment. Ensure you wear close-fitting clothing

and, if necessary, a hairnet.
Do not use protective gloves when drilling.

1.15

Safety during maintenance

Inform the operators in good time of any maintenance and repair works.
Report all safety relevant changes and performance details of the drilling machine or their
operational behavior. Any changes must be documented, the operating instructions updated
and machine operators instructed accordingly.

1.15.1 Disconnecting and securing the drilling machine

Switch off the drilling machine with the main switch and secure the main switch with a padlock
against unauthorised switching-on or switching-on by accident.
All machine parts as well as all dangerous voltages are switched off. Excepted are only the
positions which are marked with the adjoining pictogram.
1.16

Using lifting equipment

WARNING!
The use of unstable lifting and load suspension equipment that might break under load
can cause severe injuries or even death.
Check that the lifting and load suspension gear
they have sufficient load carrying,

and that it is in perfect condition.

Observe the accident prevention regulations issued by your Employers Liability
Insurance Association or other supervisory authorities applicable to your company.
Fasten the loads properly. Never walk under suspended loads!

1.16.1 Mechanical maintenance

Reinstall all protection and safety devices after any maintenance work once the work has been
completed.This includes:
covers,

safety instructions and warning signs,

grounding cables.

Check if they are working properly!
EN
B24H | B24HV | B28H | B28HV
86 Translation of the original instructions
Safety
Version 2.2.6 - 2022-04-07