Control Panel - Optimum B50 GSM Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
Clamping lever for table rota-
Fig.4-2: Table height adjustment
4.2.1

Control panel

Mode of operation selector
Fig.4-3: Control elements on the control panel
Mode of operation selector switch
With the selector switch the mode of operation is selected „drilling or thread cutting".
Mode of operation drilling
The auxiliary function of the micro switches in the drilling depth to change the direction of rota-
tion change is deactivated.
Mode of operation thread cutting
The function of the micro switches in the drilling depth and the function of the direction of rota-
tion change by the push-button actuators in the guide lever are activated.
Page 26 Geared drill
tion and height
Gear selector
Speed table
Coolant pump ON/OFF
Motor speed switch
Selector switch
Drilling/Threading
switch
Change over switch
„ON" push button
„OFF" push button
Table height adjustment
B50 GSM
Handling
Gear selector
Operation control light
Machine lighting ON/OFF
Push-button spindle feed and
direction of rotation change
Scale for drill depth
Handwheel for spindle feed
EMERGENCY stop button
Version 1.0.3 22 / 07 / 2014