Receiving - YASKAWA SI-P3 Technical Manual

3

Receiving

Please perform the following tasks after receiving the PROFIBUS-DP Option:
• Inspect the PROFIBUS-DP Option for damage.
If the PROFIBUS-DP Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the PCB (see
• If you have received the wrong model or the PROFIBUS-DP Option does not function properly, contact your supplier.
◆
Contents and Packaging
Description:
Quantity:
◆
Tool Requirements
A Phillips screwdriver (M3) metric or (#1, #2) U.S. standard size is required to install the PROFIBUS-DP Option.
Note: Tools required to prepare PROFIBUS cables for wiring are not listed in this manual.
YASKAWA ELECTRIC SIEP C730600 42A YASKAWA AC Drive-Option Card PROFIBUS-DP Technical Manual
Table 1 Contents of Package
Option Card Ground Cable
1
Figure
Screws (M3)
1 3
1).
LED Label
RUN COMM
ERR BF
1
3 Receiving
Installation Manual
MANUAL
1
7