LC Packings SWITCHOS II User Manual page 48

Software Control
TABLE 4-2
Device
ULT
ULT
SW II
ULT
FMS
A typical setup is presented FIGURE 4-1.
FIGURE 4-7
Note: Make sure to use the same signal names and the same formulas as
indicated in TABLE 4-2. If you modify the signal names or the formulas, they may
not be recognized by the (predefined) panels and some functions may not work
properly.
4-6
Signal Name and Formula Definitions
(a) Signal Name
PumpPressure
ColumnPressure
TrapColumnPressure
OvenTemperature
TrayTemperature
Example for a typical Virtual Channel Setup
D850R3
Unit Factor Formula
pump.masterpressure
bar 1.0
MPa 0.1 pump.columnpressure
psi 14.5
loading_pump.trapcolumnpressure
Oven.Temperature
°C
1.00
Sampler.Temperature
Note: a) ULT = UltiMate , FMS = FAMOS , SW II – Switchos II
User's Manual Switchos II