Switchos Ii Controlled By A Rs-232 Com Port - LC Packings SWITCHOS II User Manual

c) Make sure that the SwitchosPump box is checked on the Components tab.
The valves of the Switchos II can either be controlled directly via the
COMMUNICATION connector and via a free COM port of the PC (Section 2.3) or
by the event outputs of the Switchos II Loading Pump via the INPUTS connector
(Section 2.4).
4.2.2
To control the unit by serial communication:
a) Add the 'LC Packings Switchos II SSV' device to the Timebase (FIGURE 4-1).
This will present the LC Packings Switchos II SSV configuration box
(FIGURE 4-3).
FIGURE 4-3
Select the COM port which controls the unit and click OK to confirm the setting.
To verify or change the configuration, double-click on the 'LC Packings
Switchos II SSV' device (item 2, FIGURE 4-1).
Note: If there are not enough COM ports available, the valves of the Switchos II
can be controlled by the event outputs of the Loading Pump (Section 4.2.3).
User's Manual Switchos II

Switchos II controlled by a RS-232 COM Port

The Switchos II Configuration Box
D850R3
Software Control
4-3