Contents Of This Manual - LC Packings SWITCHOS II User Manual

Introduction

1.5 Contents of this Manual

Note: This manual covers the standard version of the Switchos II Advanced
Microcolumn Switching Unit as well as the inert version. If you are using an inert
version, please refer to Appendix D, which includes important information about
how to connect fused silica tubing to the inert switching valves.
This manual includes the following information:
Chapter 2:
Switchos II Advanced Microcolumn Switching Unit.
Chapter 3:
the unit is used in manual mode and provides a short overview of the micropump
controls. A detailed discussion of the micropump is presented in the UltiMate
Micropump User's Manual, which is supplied with the system.
Chapter 4:
Advanced Microcolumn Switching Unit by the CHROMELEON software and how
to setup the software modules.
Chapter 5:
determine that the unit is functioning in an acceptable manner.
Chapter 6:
maintenance procedures to optimize the performance of the microcolumn
switching unit. In addition, it discusses how the operator can determine the
cause of a difficulty in the operation of the instrument and includes a list of
spare/replacement parts.
Chapter 7:
Advanced Microcolumn Switching Unit.
In addition, a series of appendices that provide information about the valves that
are incorporated in the unit, interfacing the unit to the local area network, and
typical applications:
Appendix A:
Switchos II Advanced Microcolumn Switching Unit. In addition, it presents
information about the disassembly and reassembly of the valve.
Appendix B:
identified on the system network so that it can communicate with other
components.
Appendix C:
Switchos II is used for sample clean-up, protein digestion and peptide separation.
Appendix D:
NANO column or other fused silica capillary to the inert PAEK switching valves of
the Switchos II.
1-6
Installation and Getting Started describes how to install the
The User Interface describes the system controls, explains how
Software Control discusses how to control the Switchos II
Testing the Switchos II describes a series of operations to
Maintenance and Troubleshooting describes a variety of
Specifications presents the specifications of the Switchos II
Switching Valves describes the valves that are included in the
Network Identification provides explains how the Switchos II is
Cleanup of Proteins presents an explanation of how the
Connecting Fused Silica Capillary explains how to connect a
D850R3
User's Manual Switchos II