Installing The Switchos Ii With The Ultimate Capillary Hplc; System And The Famos Microautosampler; Electrical Connections - LC Packings SWITCHOS II User Manual

2.3
When the Switchos is used as a component in the LC Packings UltiMate Capillary
HPLC system, all instruments are controlled by the CHROMELEON software. The
loading pump will be included in the instrument network and the switching
valves are controlled by a COM port of the PC.

2.3.1 Electrical Connections

All electrical connections are made on the rear panel of the instrument
(FIGURE 2-1).
He Inlet
EVENTS
Connector
REMOTE
Connector
FIGURE 2-1 Rear Panel of the Switchos Advanced Microcolumn Switching Unit
Caution: Avoid touching the electrical contacts on the terminal strips.
CAUTION
Electrostatic discharges could damage internal components.
The manufacturer will not accept any liability for damages directly or indirectly
caused by connecting the Switchos Advanced Microcolumn Switching Unit to
instruments which do not meet relevant safety standards.
User's Manual Switchos
Installing the Switchos with the UltiMate Capillary HPLC

System and the FAMOS Microautosampler

D850R3
Installation and Getting Started
SOLVENT SELECTION
Button
REMOTE/LOCAL
Switch
COMMUNICATION
Connector
INPUTS
Connector
Power Outlet to
Loading Pump
Main Power Switch
Main Power Inlet
Fuse
Loading Pump
Power Switch
Power Inlet
RS-232-1
Connector
RS-232-2
Connector
2-3