Direct Tcp/Ip Connection From Visual Studio - Casio IT-800 Series Quick Start Manual

5.6 Direct TCP/IP Connection from Visual Studio

If you have a network connection to the IT-800 (for example, via WLAN or the Ethernet cradle)
then you can establish a direct link to the development PC without using ActiveSync.
For Visual Studio 2005
1. Download the files listed below to the IT-800.
-
-
-
-
-
-
The source folder in the PC:
C:\Program Files\Common Files\Microsoft Shared\CoreCon\1.0\Target\wce400\armv4i
The destination folder in the IT-800:
\Windows
2. Run ConmanClient2.exe on the IT-800.
3. Set the device IP address in Visual Studio 2005.
4. Navigate to Tools in the main menu of Visual Studio 2005 → Options... → Device Tools
→ Devices.
5. Choose Windows Mobile 6 Professional Device in the pull-down menu of Devices: and
click Properties....
6. Click Transport: to access Configure... and set up Device IP address as shown in Figure
5.10.
Figure 5.10
7. Run CMAccept.exe on the IT-800.
8. Navigate to Tools in the main menu of Visual Studio 2005 → Connect to Device....
Clientshutdown.exe
ConmanClient2.exe
CMAccept.exe
DeviceDMA.dll
eDbgTL.dll
TcpConnectionA.dll
34