Chapter 4 Create And Run Experiments On The Instrument; Run An Experiment; Create And Run An Experiment From A Template; Run An Experiment From A Saved File - Thermo Scientific QuantStudio 1 Installation, Use And Maintenance Manual

4

Chapter 4 Create and run experiments on the instrument

Run an experiment

Run an experiment

Create and run an
experiment from a
template
Run an
experiment from a
saved file
40
1. In the home screen, touch
2. (Optional) Touch a category in the left column.
3. Touch the file name.
4. (Optional) Enter or edit template properties, including Run File Name (EDS file
name), Plate Barcode, Reagent Information, and Data Destination (see "Enter
or edit template properties").
5. (Optional) Edit the run method (see "Edit the run method" on page 43).
• Add, remove, or edit a step, stage, melt curve, or data collection point.
• Adjust the heated cover temperature, sample volume, or number of cycles.
• Configure ramp rate and pause settings.
6. (Optional) Define plate wells with sample names and view Well ID, Targets, or
Dyes (see "Define, assign, and view well details").
7. Load a plate into the instrument (see "Load and unload a plate in the
QuantStudio 1 Real-Time PCR Instrument" on page 22).
™
8. Touch Start Run.
When prompted, confirm that you inserted a plate.
Note: To disable this reminder, select Do not show again or select
Settings4Insert Plate Reminder in the home screen.
1. In the home screen, touch
2. Touch the appropriate icon to navigate to your file location.
• For files saved to the guest profile, touch
• For pre and post read files, touch
3. Touch the file name.
4. (Optional) Manage templates in either
"Manage templates (EDT files)").
5. (Optional) Enter or edit template properties, including Run File Name (EDS file
name), Plate Barcode, Reagent Information, and Data Destination (see "Enter
or edit template properties").
6. (Optional) Edit the run method (see "Edit the run method" on page 43).
• Add, remove, or edit a step, stage, melt curve, or data collection point.
• Adjust the heated cover temperature, sample volume, or number of cycles.
• Configure ramp rate and pause settings.
QuantStudio
™
Open Template.
Load Experiment.
My Instrument4Post Read.
USB or
1 Real-Time PCR System Installation, Use, and Maintenance Guide
My Instrument4Public.
My Instrument (see