Intended Use And Responsibility Of The Operator - PLUSOPTIX S12C User Manual

1 Intended use and
responsibility of the operator
Thank you for choosing to purchase the "plusoptiX A12"! Plusoptix is the world leader in the
development, production and distribution of medical devices for pediatric ophthalmic
examination. If you have any further questions after reading this user manual, please do not
hesitate to contact us. The symbols in this user manual have the following meanings:
Please read this user manual before using the "plusoptiX S12" for the first time! It
explains the device's functions. When the "plusoptiX S12" is switched on,
additional training videos can be accessed by touching the blue "?".
Warnings and tips are labelled with the Attention! symbol.
The "plusoptiX S12" fulfils the requirements of Medical Devices Directive
2007/47/EEC.
The "plusoptiX S12" fulfils the requirements for a Type B applied part of IEC
60601-1.
Only connect the "plusoptiX S12" to the enclosed GSM36P12-P1J medical power
12V
supply.
The "plusoptiX S12" can be stored and transported at a temperature between
+50°C
0°C and +50°C (i.e. 32°F to 122°F). A temperature between +10°C and +40°C
0°C
(i.e. 50°F to 104°F) with a non-condensing air humidity of 20% to 80% is required
to operate the device.
Disposal
Do not dispose of the "plusoptiX S12" as domestic waste. Please send the
"plusoptiX S12" to Plusoptix (Plusoptix GmbH, Neumeyerstrasse 46, 90411
Nuremberg, Deutschland) for environmentally friendly recycling. Plusoptix will
reimburse you for the cost of the return.
Page 3/25