KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 66

9 Installation
3. Attach the right carriage side cover. Insert the claws on the cover into the slots on
the rear of the column and turn the cover to correct position. Secure the cover in
place with one screw under the status indicator light.
4. Press the side covers together and ensure that they sit properly.
5. Secure the side covers in place with the remaining four (4) screws.
NOTICE! When securing the left cover, ensure that the horizontal lasers sit in
the middle of the groove so that the cover does not block the positioning light
beam.
6. Attach the lower shelf tray by pressing the upper edges down and turning the lower
part against the side covers until it snaps in place.
66 ORTHOPANTOMOGRAPH
™
OP 3D