KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 107

INSTALLATION IN 15-40° ANGLE (RIGHT)
NOTICE! This installation setup may require the carriage plywood supports to be
removed before lifting the carriage on the column, as they might hit the wall.
* Absolute minimum dimensions
** Recommended minimum dimensions
WALL BRACKET DIMENSIONS
30 mm
17.5 mm / 0.7 in
1.2 in
16 mm / 0.6 in
ORTHOPANTOMOGRAPH
** 1032 mm / 41 in
54 mm / 2 in
** 1292 mm / 51 in
™
OP 3D
450 mm / 18 in
260 mm / 10.2 in
300 mm / 11.8 in
340 mm / 13.4 in
380 mm / 15.0 in
420 mm / 16.5 in
10 Technical data
107