KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 26

4 User Interfaces
3. SYSTEM INFO
Software
versions
Notices
Exposure
counters
4. PREFERENCES
Configurations
26
Show the device serial number and firmware versions.
Legal information and terms and conditions for use.
Show amount of exposures taken with the device.
Friendly name
3D Metal Artefact
Reduction
Force device
language
Default to Scout
before 3D
Set a name for the device, which is shown
next to the settings icon and on the
imaging software.
Enable or disable MAR, Metal Artefact
Reduction. MAR is used to reduce
the effect of metals and other dense
radiopaque objects on the 3D image.
It is recommended to keep MAR activated.
Change the language of the GUI if needed.
It is recommended not to force the
language of the GUI but change the
language profile of the workstation.
Enable or disable automatic Scout image
activation when a 3D imaging modality is
selected.
It is recommended to have the Scout
image taking enabled.
NOTICE! If the selection is set to
"enabled", a Scout image mode can
still be activated manually in the 3D
imaging program selection view.
ORTHOPANTOMOGRAPH
™
OP 3D