KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 49

2. A list of available device calibrations is shown with the status of the calibration.
Calibration status indications:
Calibration not performed
or failed.
3. Start a calibration program by pressing the calibration name and follow the
instructions on the GUI.
ORTHOPANTOMOGRAPH
NOTICE! Performed calibrations are indicated with green colour and the
completion date of the calibration. All calibrations need to be successfully
performed before using the device.
NOTICE! Calibration images are shown on the GUI as viewed from the
sensor. All adjustment instructions in the calibration images also refer to this
perspective.
™
OP 3D
Recalibration is required.
7 Maintenance
Calibration performed
successfully.
49