Service And Maintenance; Cleaning; Storage; Periodic Maintenance - CME VET-PRO VIP 2000 Operator's Manual

7 – Service and Maintenance

Cleaning

Before connecting the pump to a patient, and periodically during use, clean the unit using a lint-free cloth
lightly dampened with warm water and a mild detergent or disinfectant.
Warning:
Warning:
Caution:
similar solvents. These chemicals can cause damage to plastic components and paint. Use a
lint-free cloth dampened with warm water and a mild detergent or disinfectant.
Caution:

Storage

If the pump is to be stored for an extended period, it should be cleaned and the battery fully charged.
Store in a clean, dry atmosphere at room temperature and, if available, employ the original packaging for
protection.
Perform functional tests and ensure that battery is fully charged once every three months.

Periodic Maintenance

Periodic maintenance (PM) is recommended every 1 year. The PM is designed to assure the pump's
accuracy and detect and repair any potential pump inconsistencies prior to their occurrence in the field.
During the PM, a biomedical engineer or trained technician should perform the following procedures:
 Clean the pump thoroughly
 Visually inspect the pump to verify its structural integrity
 Perform all the manual tests in the Change Set Up menu
 Perform calibration procedures as per the Service Manual
 Run the pump for several hours to make sure no abnormalities occur during infusion such as
alarms, inaccurate infusion, and battery inconsistencies.

NOTE:
All operations should be performed by a certified CME technician.

NOTE:
It is in the technician's responsibility to repair any faults found during the PM.
VET-PRO VIP 2000™ Color Vision Operator Manual
Always turn the pump off and remove the battery before cleaning.
Always unplug the charger from AC power before cleaning.
Do not clean the pump or charger with chemicals such as Xylene, Acetone or
Do not soak or immerse any part of the pump or charger in water.
7 – Service and Maintenance
96