CME VET-PRO VIP 2000 Operator's Manual page 36

4. Rate Screen
Do one of the following:
 Press
 Enter the desired Rate and press

NOTE:
Rate units can be mg/hr or mcg/hr depends on the concentration setting
Volume Screen
5.
Do one of the following:
 Press
to confirm the existing parameters.
 Enter the desired Volume and press
6. Accumulation Screen
Do one of the following:
 Press
start infusion.
 Press
to go back to Concentration screen.
7. Press to Start Infusion.
8. During program operation, the pump displays the rate in
which the program is operating.

NOTE:
If one of the values is changed during the programming mode, the pump will not recall
the new value unless changes are confirmed by pressing

NOTE:
If prime procedure is activated during data setting, the pump will return to the original
(previous) screen once priming is completed.
Rate Titration
The pump allows rate titration during the default Rate Over Volume Program.
VET-PRO VIP 2000™ Color Vision Operator Manual
to confirm the existing parameters.
to confirm the existing parameters and
Continuous
Rate
125
.
Continuous
Volume
1000
.
Continuous
Rate
Program Volume
Volume Left
Volume Infused
Air Sensor
Pressure
Press
Continuous
Start Infusion ?
Press
Continuous
Rate
10.
███████████ █ ████████████████
mmHg
4 – Operation
80%
10:00 -
mL/hr
Adjust and press
.
80%
10:00 -
mL
Adjust and press
80%
10:00 -
125 mL/hr
1000 mL
1000 mL
0 mL
0.3 mL
730 mmHg
Key to Continue
80%
10:00 -
key to Start
80%
10:00 -
5
mL/hr
80
.
███■
Key
███■
Key
███■
███■
███■
730
36