CME VET-PRO VIP 2000 Operator's Manual page 65

Early Taper Down
If the program must be interrupted early and the planned taper down time must commence immediately, do as
follows:
Press continually (2 seconds) to stop the pump
1.
operation and display Taper Down screen.
2. Do one of the following:
 Press
 Enter time for taper down, using the numeric keys, and press
process. Taper down time should be lower than the ongoing taper down time.

NOTE:
If one of the values is changed during the programming mode, the pump will not recall
the new value unless changes are confirmed by pressing

NOTE:
If prime procedure is activated during data setting, the pump will return to the original
(previous) screen once priming is completed.

NOTE:
Whenever required to stop infusion, press
mode is limited for two minutes. After two minutes, an audible alarm is sounded.
Press

NOTE:
During programming you may backspace by using
Pressing
Pressing
Pressing
Resume or Repeat Infusion
1. When the pump is turned OFF during infusion, this screen
will appear when the pump is turned back ON.
VET-PRO VIP 2000™ Color Vision Operator Manual
to start the taper down process immediately with the existing parameters.
again to mute the alarm.
once clears the last entered digit.
again clears the next number.
when the value is empty displays the original value or the previous screen.
TPN 10:00
Early Taper Down
Down Time
(HH:mm)
1:23
Adjust and press
to start the taper down
.
. Stop displays on the screen. Stop
.
TPN 10:00
Resume – Press
Repeat – Press
4 – Operation
80% ███■
-
Key
80% ███■
-
65