Insinger Commander 18-6 Technical Manual page 2
High temperature door type dishmachine
Hide thumbs
Also See for Commander 18-6:
Advertisement
Thank you for purchasing a quality Insinger product.
In the space provided below please record the model,
serial number and start-up date of this unit:
Model:__________________________________
Serial Number:___________________________
Start-Up Date:____________________________
When referring to this equipment please have this
information available.
Each piece of equipment at Insinger is carefully tested
before shipment for proper operation. If the need
for service should arise please contact your local
Authorized Insinger Service Company.
To find your local authorized Service Company please
visit our web site, www.insingermachine.com or call
Insinger at 800-344-4802.
For proper activation of the Insinger Limited Warranty,
a SureFire
Start-up should be completed on your
TM
machine. Refer to the Introduction section in this
manual for an explanation of Insinger's SureFire
Start-up and Check-out Program.
Please read the Insinger Limited Warranty and all
installation and operation instructions carefully before
attempting to install or operate your new Insinger
product.
To register your machine for warranty, or for answers to
question concerning installation, operation, or service
contact our Technical Service Department.
TECHNICAL SERVICE CONTACTS
Toll-Free
800-344-4802
Fax
215-624-6966
e-mail
service@insingermachine.com
Web site
www.insingermachine.com
Commander 18-6 Technical Manual 2018
®
TM
TABLE OF CONTENTS
Part 1
Technical Information
• Specification Sheets
• Introduction
• Definitions
• Safety Summary
• Warranty
Part 2
Installation Instructions
• General Installation Instructions
• Installation Drawings
Part 3
Operation Instructions
Part 4
Cleaning Instructions
• Daily Cleaning Instructions
• Weekly Cleaning Instructions
Part 5
Maintenance and Repair Procedures
• Maintenance Requirements
• Maintenance Procedures
• Troubleshooting
Part 6
Parts and Assemblies
• Assembly Drawings with Parts Lists
Part 7
Electrical Schematics and Parts
• Electrical Schematics
• Control Panel Layouts
Part 8
Straight to Corner Conversion Instructions
www.insingermachine.com
1-7
8-13
14
15
16-26
27-50
51-57
58-60
800-344-4802
Advertisement
