European Union Radio Equipment And Telecommunications Terminal Equipment (R&Tte) Directive (1999/5/Ec) And En 301 489-1; European Union Electromagnetic Compatibility (Emc) Directive (2004/108/Ec) - Comtech EF Data CRS-170A Installation And Operation Manual

L-band 1:1 redundancy switch, accessory product for use only with comtech ef data cdm-625a, cdm-625, h64/h32/h16/h8 heights remote gateways, cdm-850, cdm-840, cdm-760, cdm-750, cdm-570al, cdm-570l, cdm-710gl, cdm-710, cdm-700, cdm-600l clm-9600l, and sdm-
Table of Contents

Advertisement

CRS-170A L-Band 1:1 Redundancy Switch
Preface
South Korean Electromagnetic Compatibility
Unofficial translation:
Class A: EMC Registration is done on this equipment for business use only (Class A). Product seller and
user should notice that this equipment is not for household use.
European Union Radio Equipment and Telecommunications Terminal
Equipment (R&TTE) Directive (1999/5/EC) and EN 301 489-1
Independent testing verifies that the unit complies with the European Union R&TTE Directive, its
reference to EN 301 489-1 (Electromagnetic compatibility and Radio spectrum Matters [ERM];
ElectroMagnetic Compatibility [EMC] standard for radio equipment and services, Part 1: Common
technical requirements), and the Declarations of Conformity for the applicable directives, standards, and
practices that follow:
European Union Electromagnetic Compatibility (EMC) Directive
(2004/108/EC)
Emissions: EN 55022 Class A – Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment.
Immunity: EN 55024 – Information Technology Equipment: Immunity Characteristics, Limits,
and Methods of Measurement.
EN 61000-3-2 – Harmonic Currents Emission
EN 61000-3-3 – Voltage Fluctuations and Flicker.
Federal Communications Commission Federal Code of Regulation FCC Part 15, Subpart B.
CAUTION: TO ENSURE THAT THE UNIT COMPLIES WITH THESE STANDARDS, OBEY
THESE INSTRUCTIONS:
Use coaxial cable that is of good quality for connections to the L-Band Type 'N' Rx (receive)
female connector.
Use Type 'D' connectors that have back-shells with continuous metallic shielding.
Type 'D' cabling must have a continuous outer shield (either foil or braid, or both). The
shield must be bonded to the back-shell.
Operate the Switch and modems with their covers on at all times.
xvi
MN/CRS170A.IOM
Revision 14

Advertisement

Table of Contents
loading

Table of Contents