Gigabit Ethernet Interface (Cdi-70) Example - Comtech EF Data CRS-170A Installation And Operation Manual
L-band 1:1 redundancy switch, accessory product for use only with comtech ef data cdm-625a, cdm-625, h64/h32/h16/h8 heights remote gateways, cdm-850, cdm-840, cdm-760, cdm-750, cdm-570al, cdm-570l, cdm-710gl, cdm-710, cdm-700, cdm-600l clm-9600l, and sdm-
Hide thumbs
Also See for CRS-170A:
- Installation and operation manual (154 pages) ,
- Installation and operation manual (148 pages)
Table of Contents
Advertisement
CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
5.9.2.2
Gigabit Ethernet Interface (CDI-70) Example
See CEFD White Paper "Bridged Ethernet Interface Redundancy" available for download
from Comtech EF Data's Web site (www.comtechefdata.com).
Figure 5-50 shows the block diagram and cabling example for a CDM-710GL 1:1 modem configuration
with the CDI-70 Gigabit Ethernet data interface installed in Slot 2, with Slot 1 empty. This setup requires
no cabling and component kit – you must use user-provided Ethernet cables and Layer 2 Switch for
direct connection to the CDI-70.
Figure 5-50. CDM-710GL CDI-70 Gigabit Ethernet 1:1 Example
CDM-710GL Block diagram – CDI-70 Gigabit Ethernet Interface
5–59
MN/CRS170A.IOM
Revision 14
Advertisement
Table of Contents
