Single G.703 E3/T3/Sts-1 75Ω Data Interface (Cdi-10-1) Kit Kt/12583 - Comtech EF Data CRS-170A Installation And Operation Manual
L-band 1:1 redundancy switch, accessory product for use only with comtech ef data cdm-625a, cdm-625, h64/h32/h16/h8 heights remote gateways, cdm-850, cdm-840, cdm-760, cdm-750, cdm-570al, cdm-570l, cdm-710gl, cdm-710, cdm-700, cdm-600l clm-9600l, and sdm-
Hide thumbs
Also See for CRS-170A:
- Installation and operation manual (154 pages) ,
- Installation and operation manual (148 pages)
Table of Contents
Advertisement
CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
5.9.2.1.1
Single G.703 E3/T3/STS-1 75Ω Data Interface (CDI-10-1) Kit
KT/12583
Figure 5-48 shows an example for a CDM-710GL 1:1 modem configuration with the CDI-10-1 Single
G.703 data interface installed in Slot 1, and with Slot 2 empty. The figure shows installation of one
KT/12583 Single G.703 Interface Kit.
CEFD Part No.
CA/BNC75OHM
RF/SA32KC-IN/OUT
Figure 5-48. CDM-710GL CDI-10-1 Single G.703 E3/T3/STS-1 1:1 Example
KT/12583 Single G.703 (CDI-10-1) 75Ω Interface Kit
Qty
Description
4
Cable – IF BNC, 75Ω, 1'
2
Combiner – 2-way w/Bracket, 0.25-300 MHz, 75Ω BNC
5–57
MN/CRS170A.IOM
Revision 14
Advertisement
Table of Contents
