Data Interface (Cdi-50) Kits Kt/12585 (Single-Mode) Or Kt/12584 (Multi-Mode) - Comtech EF Data CRS-170A Installation And Operation Manual
L-band 1:1 redundancy switch, accessory product for use only with comtech ef data cdm-625a, cdm-625, h64/h32/h16/h8 heights remote gateways, cdm-850, cdm-840, cdm-760, cdm-750, cdm-570al, cdm-570l, cdm-710gl, cdm-710, cdm-700, cdm-600l clm-9600l, and sdm-
Hide thumbs
Also See for CRS-170A:
- Installation and operation manual (154 pages) ,
- Installation and operation manual (148 pages)
Table of Contents
Advertisement
CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
5.11.2.1.3
OC-3 Data Interface (CDI-50) Kits KT/12585 (Single-Mode) or
KT/12584 (Multi-Mode)
Figure 5-62 shows a CDM-700 1:1 modem configuration with installation of one CDI-50 data interface
installed in Slot 1 for use with OC-3 data, with Slot 2 empty. This figure shows installation of one
KT/12585 OC-3 Single-Mode Interface Kit. Multi-Mode configurations use the KT/12584 OC-3 Multi-
Mode Interface kit. You must use the cable kit that is specific to Single Mode or Multi Mode operation:
•
The KT/12585 OC-3 Single-Mode Interface Kit features yellow cables.
•
The KT/12584 OC-3 Multi-Mode Interface Kit features orange cables.
CEFD Part No.
PP/CPS2A12501
CEFD Part No.
PP/CPM6A1250
Figure 5-62. CDM-700 CDI-50 OC-3 1:1 Example (Single-Mode shown)
KT/12585 OC-3 Single-Mode (CDI-50) Interface Kit
Qty
Description
2
Cable Assy – RoHS-Compliant, Optical Coupler, SC/UPC Connectors
OR
KT/12584 OC-3 Multi-Mode (CDI-50) Interface Kit
Qty
Description
2
Cable Assy – RoHS-Compliant, Optical Coupler, SC/UPC Connectors
5–75
MN/CRS170A.IOM
Revision 14
Advertisement
Table of Contents
