Unit-To-Switch Control Interface Connection - Comtech EF Data CRS-170A Installation And Operation Manual
L-band 1:1 redundancy switch, accessory product for use only with comtech ef data cdm-625a, cdm-625, h64/h32/h16/h8 heights remote gateways, cdm-850, cdm-840, cdm-760, cdm-750, cdm-570al, cdm-570l, cdm-710gl, cdm-710, cdm-700, cdm-600l clm-9600l, and sdm-
Hide thumbs
Also See for CRS-170A:
- Installation and operation manual (154 pages) ,
- Installation and operation manual (148 pages)
Table of Contents
Advertisement
CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
5.4.1.1
Unit-to-Switch Control Interface Connection
1) The KT-0000160 CRS-170A L-Band 1:1 Redundancy Kit (Section 5.2.1) provides all
components shown in Figure 5-18.
2) When you connect the Control Interface cables between the CRS-170A and the HRGs,
make sure that you securely fasten the screw locks on the Type 'D' connectors. This
prevents accidental disconnection of the cables, particularly when you are removing and
replacing a standby unit.
CEFD Part No.
CA/WR9378-4
Figure 5-18. HRG Unit-to-Switch Control Connections
Qty
Description
2
Control Cable – Universal, DB-9M, 4'
5–22
MN/CRS170A.IOM
Revision 14
Advertisement
Table of Contents
