155Mb Copper Data Interface (Cdi-50) Kit Kt/12583 - Comtech EF Data CRS-170A Installation And Operation Manual

L-band 1:1 redundancy switch, accessory product for use only with comtech ef data cdm-625a, cdm-625, h64/h32/h16/h8 heights remote gateways, cdm-850, cdm-840, cdm-760, cdm-750, cdm-570al, cdm-570l, cdm-710gl, cdm-710, cdm-700, cdm-600l clm-9600l, and sdm-
Table of Contents

Advertisement

CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
5.11.2.1.2

155MB Copper Data Interface (CDI-50) Kit KT/12583

Figure 5-61 shows an example for a CDM-700 1:1 modem configuration with a CDI-50 data interface
installed in Slot 1 for use with 155MB Copper data, with Slot 2 empty. This figure shows installation of
one KT/12583 155MB Copper Interface Kit – each kit can supply one or two CDI-50 interfaces.
CEFD Part No.
CA/BNC75OHM
RF/SA32KC-IN/OUT
Figure 5-61. CDM-700 CDI-50 155MB Copper 1:1 Example
KT/12583 155MB Copper (CDI-50) Interface Kit
Qty
Description
4
Cable – IF BNC, 75Ω, 1'
2
Combiner – 2-way w/Bracket, 0.25-300 MHz, 75Ω BNC
5–74
MN/CRS170A.IOM
Revision 14

Advertisement

Table of Contents
loading

Table of Contents