Comtech EF Data CRS-170A Installation And Operation Manual page 112
L-band 1:1 redundancy switch, accessory product for use only with comtech ef data cdm-625a, cdm-625, h64/h32/h16/h8 heights remote gateways, cdm-850, cdm-840, cdm-760, cdm-750, cdm-570al, cdm-570l, cdm-710gl, cdm-710, cdm-700, cdm-600l clm-9600l, and sdm-
Hide thumbs
Also See for CRS-170A:
- Installation and operation manual (154 pages) ,
- Installation and operation manual (148 pages)
Table of Contents
Advertisement
CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
5.7.2.2
Optical Gigabit Ethernet Interface Option Example
Figure 5-35 shows a CDM-760 or CDM-750 1:1 modem configuration that uses the FAST-activated 'J7 |
OPTICAL' SFP port with the optional Optical Gigabit Ethernet Interface module (CEFD P/N IC-0000058).
You must use the cable assembly that is specific to Single Mode or Multi Mode operation:
•
The CA-0000560 Optical Single-Mode Y-Cable set features yellow cables.
•
The CA-0000559 Multi-Mode Y-Cable set features orange cables.
Type LC sockets, part of the optional IC-0000058 SFP Module, are typical for
Single-Mode or Multi-Mode Optical Gigabit Ethernet:
CEFD Part No.
Qty
CA-0000560
1
CEFD Part No.
Qty
CA-0000559
1
Figure 5-35. CDM-760 or CDM-750 Optical Gigabit Ethernet 1:1 Example
Description
'Y' Cable Assy – RoHS-Compliant, Single-Mode Optical, LC Connectors
Description
Y' Cable Assy – RoHS-Compliant, Multi-Mode 'Optical, LC Connectors
-OR-
5–42
MN/CRS170A.IOM
Revision 14
Advertisement
Table of Contents
