The following table describes the labels in this screen.
Label
IP Address
Active
5.1.15
Power over Ethernet (P.O.E.)
5.1.15.1 System setting
The following interface is the P.O.E. setting interface. There are 8 ports (port 1 to port 8)
act as P.S.E. (Power Supply Equipment) ports.
Label
maximum power budget
Power Limit Mode
Legacy PD Detection
Total Power Consumption switch total power consumption (W)
Power voltage
ORing Industrial Networking Corp
Description
Enter the IP address that you want to detect.
Click "Active" to send ICMP packets
Description
setting maximum power available.
By Class : In this mode each port automatic determines how
much power to reserve according to the "class" the
connected PD
Port Setting : In this mode each port power output follow
"port setting--->power limit" value.(maximum = 36W)
Enable Legacy PD Mode
POE Power Voltage(V)
IPS-3082GC-AT User's Manual
87