Vlan Setting - Port Based - ORiNG IPS-3082GC-AT User Manual

The following table describes the labels in this screen.
Label
VLAN Operation Mode
GVRP Mode
Management VLAN ID
Port
Link type
Untagged VID
Tagged VIDs
Apply
5.1.8.2 VLAN Setting – Port Based
Packets can go among only members of the same VLAN group. Note all unselected ports
are treated as belonging to another single VLAN.
VLAN-tagging is ignored.
ORing Industrial Networking Corp
Description
Configure VLAN Operation Mode: disable, Port Base,802.1Q
Enable/Disable GVRP function.
Management VLAN can provide network administrator a
secure VLAN to management Switch. Only the devices in the
management VLAN can access the switch.
Select the port to configure.
There are 3 types of link type:
Access Link: single switch only, allows you to group ports by
setting the same VID.
Trunk Link: extended application of Access Link, allows you
to group ports by setting the same VID with 2 or more
switches.
Hybrid Link: Both Access Link and Trunk Link are available.
Hybrid(QinQ) Link: enable QinQ mode，allow you to insert
one more VLAN tag in a original VLAN frame.
Set the port default VLAN ID for untagged devices that
connect to the port. The range is 1 to 4094.
Set the tagged VIDs to carry different VLAN frames to other
switch.
Click "Apply" to set the configurations.
IPS-3082GC-AT User's Manual
If the port-based VLAN enabled, the
53