Ping Alive Check - ORiNG IPS-3082GC-AT User Manual

Label
Port
Delay Mode
Delay Time(0-300)

5.1.15.5 Ping Alive Check

You can control the P.O.E. function by using the ping command , in order to turn on or
off other P.O.E. device which connect with port assign.
The following table describes the labels in this screen.
Label
Ping Check
Send Mail
Port
Ping IP Address
Interval Time
Retry Time
Failure Log
ORing Industrial Networking Corp
Description
Port number.
Enable or disable Delay Mode
Time to provide power
Description
Enable or disable Ping Check function
When " ping " fails, can notify users by mail
You can appoint to want to control P.O.E. port number
Set up IP Address
Spacing interval to set up Ping(10 sec~120 sec)
Set up the number of times of ping
Note down " Ping Check " a result of movement after starting.
IPS-3082GC-AT User's Manual
90