Commands Set List-Sntp Command Set - ORiNG IPS-3082GC-AT User Manual

show systemlog
6.15 Commands Set List—SNTP command set
IPS-3082GC-AT
Commands
sntp enable
sntp daylight
sntp daylight-period
[Start time] [End time]
sntp daylight-offset
[Minute]
sntp ip
[IP]
sntp timezone
[Timezone]
ORing Industrial Networking Corp
P Show system log
client & server
information
Level Description
G Enable SNTP function switch(config)#sntp enable
G Enable daylight saving
time, if SNTP function
is inactive, this
command can't be
applied.
G Set period of daylight
saving time, if SNTP
function is inactive,
this command can't be
applied.
Parameter format:
[yyyymmdd-hh:mm]
G Set offset of daylight
saving time, if SNTP
function is inactive,
this command can't be
applied.
G Set SNTP server IP, if
SNTP function is
inactive, this
command can't be
applied.
G Set timezone index,
use "show sntp
timzezone" command
to get more
information of index
IPS-3082GC-AT User's Manual
switch#show systemlog
Example
switch(config)#sntp daylight
switch(config)# sntp daylight-period
20060101-01:01 20060202-01-01
switch(config)#sntp daylight-offset 3
switch(config)#sntp ip 192.169.1.1
switch(config)#sntp timezone 22
116