5.1.7 Port Setting
5.1.7.1 Port Control
By this function, you can set the state, speed/duplex, flow control, and security of the
port.
The following table describes the labels in this screen.
Label
Port NO.
State
Speed/Duplex
Flow Control
Security
Auto Detect 100/1000
Apply
ORing Industrial Networking Corp
Port Control interface
Description
Port number for setting.
Enable/Disable the port.
You can set Auto-negotiation, 100-full, 100-half, 10-full, 10-half
mode.
Support symmetric and asymmetric mode to avoid packet loss
when congestion occurred.
Enabled port security will disable MAC address learning in this
port. Thus only the frames with MAC addresses in port security
list will be forwarded, otherwise will be discarded.
Auto Detect SFP port SFP Module speed (100M / 1000M)
Click "Apply" to activate the configurations.
IPS-3082GC-AT User's Manual
47