Commands Set List-Port Mirroring Command Set; Commands Set List-802.1X Command Set - ORiNG IPS-3082GC-AT User Manual

6.11 Commands Set List—Port Mirroring command set
IPS-3082GC-AT
Commands
monitor rx
monitor tx
show monitor
monitor
[RX|TX|Both]
show monitor
no monitor
6.12 Commands Set List—802.1x command set
IPS-3082GC-AT
Commands
8021x enable
8021x system radiousip
[IP address]
8021x system serverport
[port ID]
ORing Industrial Networking Corp
Level Description
Set RX destination
G
port of monitor
function
G Set TX destination
port of monitor
function
Show port monitor
P
information
I Configure source port
of monitor function
Show port monitor
I
information
I Disable source port of
monitor function
Level Description
G Use the 802.1x global
configuration
command to enable
802.1x protocols.
G Use the 802.1x
system radious IP
global configuration
command to change
the radious server IP.
G Use the 802.1x
system server port
IPS-3082GC-AT User's Manual
Example
switch(config)#monitor rx
switch(config)#monitor tx
switch#show monitor
switch(config)#interface fastEthernet
2
switch(config-if)#monitor RX
switch(config)#interface fastEthernet
2
switch(config-if)#show monitor
switch(config)#interface fastEthernet
2
switch(config-if)#no monitor
Example
switch(config)# 8021x enable
switch(config)# 8021x system
radiousip 192.168.1.1
switch(config)# 8021x system
serverport 1815
111