Getting Started - Burmester 099 Owner's Manual

The 099 preamplifier sports the BURMESTER GREEN power supply. This power supply automatically adjusts to the
available AC voltage. Therefore, it is possible to operate this equipment in any country that supplies electricity within
the voltage limits printed on the rear panel of the unit.
•
Connect the desired in- and outputs of the preamplifier with the other components of your playback system. For
details please refer to the chapter CONNECTIONS.
•
Make sure the AC mains switch (11) on the rear panel has been set to OFF.
•
Connect the power cord to the AC mains terminal (10) and plug the AC plug into the wall outlet.
•
Make sure the POWER switch (8) on the front panel is also OFF.
•
Switch the AC mains switch (11) on the rear panel to ON. The POWER LED (9) will light up green for about
two seconds. During this time the power supply recognizes the available voltage and adjusts to it. After this
procedure has been concluded the POWER LED (9) will go dark again.
•
Now you can switch the preamplifier fully on using the POWER switch (8) on the front panel.
The following chapters of this Owner's Manual will provide detailed instructions about the extraordinary possibilities
and capabilities of the 099 preamplifier.

GETTING STARTED

11