Tension Test; Splice Results Storage And Query - Promax Prolite-41 User Manual

2.7

Tension Test

If "Tension test" is set "on", after splicing, tension test will automatically be
performed and the pulling force is 2N after splice. Menu operation is shown in
next Figure.
2.8

Splice Results Storage and Query

History Records Menu Descriptions
►
Total Arc number
Electrodes arc times since the last record is eliminated.
Reset Arc count
Eliminate arc times after electrodes are replaced.
22
Page
Figure 22. Tension Test.
Figure 23. History Records Menu.
November 2018