Table of Contents
Advertisement
calibrated.
2 BASIC OPERATION
This chapter describes the fusion splicer's basic operation methods. Read this
chapter in detail. It can help you use the splicer correctly, avoid damage and
causing abnormal problems.
2.1
Power Supply
This product can be charged by the following two power supply modes:
Internal lithium battery (with no external power adapter inserted).
►
External power adapter (with external power adapter inserted).
►
ATTENTION:
Please use the supporting power adapter of this product. Using
other adapters can cause anomaly of the equipment.
2.1.1
Power Supply by External Power Adapter
The input of adapter: 100-240V,1.4A ,50/60HZ. The output of adapter: 13.5V,
5A. Please use this product's supporting power adapter. Insert the adapter's DC
output line into the fusion splicer's external power interface. If the battery pack
has already been installed in the fusion splicer, the adapter will charge the
battery pack while supply power for the splicer.
2.1.2
Power Supply
Battery electric capacity indication
►
The remaining capacity percentage will be shown at top right corner of the
monitor, as shown in Figure 1.
6
Page
Figure 6. Show the Remaining Battery Capacity.
November 2018
Advertisement
Table of Contents
