2.9
Heating Protection Sleeve
Select "Sleeve Heating Mode" in "Functions Setting" menu to enter
heating mode (view figure).
Heating Mode Menu Descriptions
►
ATTENTION:
It is better to use preset heating parameters.
Open the heater cover.
Open the Windproof cover, carefully remove the spliced fibre (without
clamp) and move protection sleeve to splice point while ensure splice
point is at the center of protection sleeve.
24
Page
Figure 25. Heating mode Menu.
Heating Program
User can choose the preset heating program based on different
protection sleeve or set the program himself.
Casing Type
Select the casing type: normal from 10-60 mm, FC-type, SC-type.
Casing Diameter
1-8mm.
Heating temperature
Heating temperature upper limit.
Heating time
Sleeve heating time.
.
November 2018